RWL Systems, Inc.

Done right, at a fair price, on time.

Example of our 10-32 clamp design
Left, is an example of our Precision miniature Toe clamp series.
Pictured are the #10-32 size.
2.0” long x .50” wide x .25” thick

**Please note: (3) clamps are pictured for clearity of design features, you do not get (3) pcs per unit ordered**Also, we DO NOT include the fasteners as they are infinately variable**

Typically, these are:
1) CNC machined for consistency and accuracy.

2) Engraved with the clamp and screw size,

3) De-burred, Heat treated, Black oxided and oiled, to preserve the finish.


We offer a variety of clamp sizes:
Common sizes are: #8-32,24, #10-32,24, ¼-20,28, 5/16-18,24, 3/8-16,24, ½-13,20


Each are of the same design and proportionately larger with the larger screw sizes.

For example the ¼-20 clamp is 2.75 in length, ½ thick, and 9/16 (.562) wide.

All are offered in the materials listed in the chart below.


We have used these many times to secure parts in inspection fixtures.
They’re great for small prototype parts on the Bridgeport mills and rotary tables, CNC’s, Lathe Faceplates, the list goes on and on.
Their small, narrow design, gets them into tight places, when other clamps are just too big.

I’m sure they would work fine for woodworking projects, EDM burning, Inspection, anywhere you need a strong small clamp.

Gang them up to produce tremendous holding power in tight places.


We offer these in several materials:

1018 Carburized and hardened to Rc 55-60 with Black oxide finish or plain

8620 Carburized and hardened to Rc 55-60 with Black oxide finish or plain

4140 Hardened to Rc 58-62 with Black oxide finish or plain

300 series Stainless

400 series Stainless

(if you need PH material, we can offer those as well, hardened, at additional cost)

2024 Aluminum *Anodized or plain (Clear, Black, Blue, Gold, Red)

T6061 Aluminum* Anodized or plain (Clear, Black, Blue, Gold, Red)

*(Aluminum Anodizing is offered free with a minimum order depending on the size of the clamps. Ranging from 120 pcs minimum for the smaller clamps to 70 pcs minimum of the larger clamps.)
(Smaller orders require a $100.00 additional fee. Please allow an additional 2 week delivery for anodizing)
Call us or fax an RFQ (Request for Quote) with your criteria, and we’ll customize these clamps for your application.
Tip Designs are available for delicate materials where marring of the surface is undesirable.
Small Quantities are not a problem.

Size Each 4-10 pcs (Stock) 11-50 pcs (7 days ARO) 51-100 (14 days ARO) +100 pcs
Carbon Steel/Alum.
#8-32,24 or  #10-32,24

$7.00ea.

$9.00ea. Stainless/4140

$6.50ea.

$8.50ea. Stainless/4140

$6.00ea.

$8.00 ea. Stainless/4140

$5.50ea.

$7.50ea. Stainless/4140
Call or fax RFQ

Carbon steel/ Alum.

¼-20,28

$9.00ea.

$10.00ea. Stainless/4140

$8.50ea.

$9.50ea. Stainless/4140

$7.50ea.

$9.00ea. Stainless/4140

$7.00ea.

$8.50ea. Stainless/4140
Call or fax RFQ

Carbon steel/ Alum.

5/16-18,24

$10.00ea.

$12.00ea. Stainless/4140

$9.50ea.

$11.50ea. Stainless/4140

$9.00ea.

$11.00ea. Stainless/4140

$8.50ea.

$10.50ea. Stainless/4140
Call or fax RFQ

Carbon steel/ Alum.

3/8-16,24

$12.00ea.

$14.00ea. Stainless/4140

$11.00ea.

$13.50ea. Stainless/4140

$10.50ea.

$13.00ea. Stainless/4140

$10.00ea.

$12.50ea. Stainless/4140
Call or fax RFQ

Carbon steel/ Alum.

7/16-18,24

$14.00ea.

$16.00ea. Stainless/4140

$13.50ea

$15.50ea. Stainless/4140

$13.00ea.

$15.00ea. Stainless/4140

$12.50ea.

$14.50ea. Stainless/4140
Call or fax RFQ

Carbon steel/ Alum.

½-13,20

$16.00ea.

$18.00ea. Stainless/4140

$15.50ea.

17.50ea. Stainless/4140

$15.00ea.

$16.50ea. Stainless/4140

$14.50ea.

$16.00ea. Stainless/4140
Call or fax RFQ
Custom tip Designs Competitive Rates
Competitive Rates
Competitive Rates
Competitive Rates
Call or fax RFQ

Custom Materials

Or heat treat
Competitive Rates
Competitive Rates
Competitive Rates
Competitive Rates
Call or fax RFQ

Ordering information: Our Ebay store is no longer active due to excessive fees, however, you may still order via an e-mail and pay with Paypal.
Here is the Process:
1) Send us an e-mail with the sizes, quantities, material, and shipping preference you would like.
2) We will confirm your order with an expected delivery date and approximate shipping charges.
3) We will manufacture your order, or pull from stock, and send you a PayPal invoice. Shipping charges will be calculated and included using your choice of USPS or UPS.
4) Once you pay the invoice and we get confirmation that the transaction has completed, we ship the next business day.
We can ship Via, USPS or UPS. Any other shipping arrangements, ie.: using your account or another carrier, will delay shipping.

 
Customer provided examples
Several customers have sent us pictures of their clamps in operation, Left are a few examples.

Customer provided examples